Description

Square Trailer Rubber Bumper-8ft / 96″ long, w/ Pre-Drilled Holes: in 2″ Height

Molded of hard rubber, square in shape & hollow in the middle, 96″ in length.
(Some customers think this shape of bumper is stronger, plus it has a toe grip on the top surface.)  2″ height measurement is the flat back where it is fastened to the trailer. Comes with pre-cut recessed holes for bolt-on installation. If the length of your bumper is shorter than 96″, you may still order this bumper, but please measure the bolt-hole locations carefully! These bumpers are hollow, and can be cut with a saw. They can also be drilled with additional bolt holes (do it yourself).

 Pre-drilled bolt holes: The first bolt hole center is placed 4 inches from each end, then the next bolt hole centers are 11 inches apart.  9 holes total. The holes are drilled for a 3/8″ bolt (not supplied)..
From the left side: bolt holes are centered at: 4″, 15″, 26″, 37″, 48″, 59″, 70″, 81″, 92″.
 OFC: An extra charge in addition to flat-rate shipping charges for shipping a LARGE, HEAVY OR LONG item by ground.

Trail Pals tip: For accurate measurements, if the old bumper is already removed from the trailer, lay the bumper on a flat surface & measure the flat back for the hole pattern or you can also measure the trailer side.