Description

Square Trailer Rubber Bumper-8ft / 96″ long X 4” Height / Back w/ Pre-Drilled Holes

Molded of hard rubber, square in shape & hollow in the middle, 96″ in length.
(Some customers think this shape of bumper is stronger, plus it has a toe grip on the top surface.)  Height measurement is the flat back where it is fastened to the trailer. Comes with pre-cut recessed holes for bolt-on installation. If the length of your bumper is shorter than 96″, you may still order this bumper, but please measure the bolt-hole locations carefully! These bumpers are hollow, and can be cut with a saw. They can also be drilled with additional bolt holes (do it yourself).

 Pre-drilled bolt holes: The first bolt hole center is placed 4 inches from each end, then the next bolt hole centers are 11 inches apart. 9 holes total. The holes are drilled for a 9/16″ bolt (not supplied). From the left side: bolt holes are centered at 4″, 15″, 26″, 37″, 48″, 59″, 70″, 81″, 92″.

 OFC: A $100. extra charge in addition to flat-rate shipping charges for shipping a LARGE, HEAVY OR LONG item by ground.

This bumper costs over $100. to ship by ground.

Trail Pals tip: For accurate measurements, if the old bumper is already removed from the trailer, lay the bumper on a flat surface & measure the flat back for the hole pattern.